Important points to remember when installing Eazy Move


  1. Ensure that the caravan’s break is disengaged. The towing connection must be fully pulled out. See Photo 1.1.
  2. Please keep in mind that Easy Move is in an upright position when measuring the position to fit the H-bracket to the caravan. See Photo 1.2.
  3. To fit the H-bracket when the safety chain is bolted to the bottom of the A-frame of the caravan, the same bolts can be used. Install the H-frame above the safety chain. See Photo 2.3.
  4. When the safety chain is welded to the A-frame, you need to drill two 12 mm holes to fit the H-bracket with 10 mm bolts. See Photo 2.3.
  5. The H-bracket is always fitted the same way for all vans and trailers. Sometimes the towing connectors differ in length and then the two wingnut bolts on the front fork on Eazy Move must be moved to other holes that are provided on the mover. See Photo 3.1.

[ View Flyer... ]

How to hook up and unhook Eazy Move after the H-bracket has been installed


  1. Lift the caravan high enough with the jockey wheel and then Eazy Move will easily fit under the caravan.
  2. Carry and fit Eazy Move at the handle bar. See Photo 1.4.
  3. Get Eazy Move in position first and let the two 10 mm bolts fit through the holes in the H-bracket. See Photo 2.5.
  4. With one hand holding Eazy Move, use the other hand to pull the caravan’s towbar upwards (See Photo 1.6) and then pull the Eazy Move upwards. It will clip in and now hang in position. You can now release both hands.
  5. You must tighten the wingnuts by hand.
  6. The Eazy Move is now in position, the caravan can be jacked down with the jockey wheel, and it will be standing on the wheels of Eazy Move.
  7. You are now ready to move your caravan into position.

[ View Installation Instructions... ]

See the process in action

Watch the two videos below to see how to attach Eazy Move.

[ Attach Eazy Move ] [ Remove Eazy Move ]